PRECISION Induction
Heater - Series PIH - is designed to heat the Bearings and other
shrink-fit components prior to mounting using latest technology
intelligent microcontroller based electronic controls.
The life of Bearings and other torque transmitting steel
components, which are shrunk-fit on shaft, may get cut short
due to rough handling and faulty installation or mounting
methods. This can be avoided by expanding them by induction
heating for the purpose of mounting of the component.
PRECISION Induction
Heaters - Series PIH - are available in 5 different models
for mounting, range of bearings having bore size from 14 mm
and above. Fast, safe and economical heating of bearings is
best features of PIH Induction heaters.
PIH series is light weight and portable for better performance.
It has power capacity of 3.5 / 4.0 KVA. The controls are intelligent
microcontroller based programmable electronic controls. It
has two operating modes, Temperature mode and Time mode. Both
are controlled through feather touch key Board. Both modes
can be seen at the time of operation. It can also be used
to heat bearings of larger diameter using a pair of Raiser
Blocks size 55 x 55 x 125 mm. The unit can also be used to
heat a plate of any magnetic material by placing the plate
in place of the horizontal yoke across the vertical supports.
| Sr. |
PRODUCT DATA |
PIH - 2003 SPL |
| 1) |
Diameter (mm) Bearing |
60 to 650 |
| 2) |
Bearing Weight |
300 Kg |
| 3) |
Power |
10.5 / 11 KVA |
| 4) |
Voltage |
440V |
| 5) |
Power Control |
25%, 50%, 75%, & 100% |
| 6) |
Temperature Control (Range) |
0 - 250oC |
| |
Maximum Temperature |
400oC |
| |
Accuracy Temperature |
±
3oC |
| 7) |
Time - Control |
0 - 99 Minutes |
| 8) |
Residual Magnetism |
< 2A / cm |
| 9) |
Overall dimensions (wxdxh) (mm) |
850 x 330 x 450 |
| 10) |
Space between supports (wxh) (mm) |
255 x 255 |
| 11) |
Weight (Main Unit) |
75 Kg. |
| 12) |
Weight with Standard Yokes |
90 Kg. |
| 13) |
Horizontal Yoke Sizes (mm) |
70 X 70 X 450 |
| |
|
40 x 40 x 450 |
| |
|
-------------- |
| 14) |
Can Heat Sealed & Pre-greased Bearings |
 |
| 15) |
Thermal Over Protection |
|
| Sr. |
Optional Accessories |
| 1) |
Horizontal Yoke Sizes (mm) |
30 x 30 x 450 |
| |
|
40 x 40 x 450 |
| |
|
50 x 50 x 450 |
| |
|
60 x 60 x 450 |
| 2) |
Digital Thermometer (0-500oC) |
|
| 3) |
Roll - Sliding Model |
|
| 4) |
Swing Arm Model |
|
| 5) |
Riser Block (Pair) (mm) |
|
| 6) |
Magnetic Temperature Probe |
|
| 8) |
Equipment Trolley |
------------- |
We
reserve the right to change the specifications without prior notice. |
